Wall Panels
Standard Metal Wall Panels
Standard PBR Panel
| Application | Roofs, Walls, Fascias, Soffits |
| Coverage Widths | 36″ |
| Rib Spacing | 12″ on Center |
| Rib Height | 1 & 1/4″ |
| Gauges | 26 (standard); 22, 24, 29 (optional) |
| Minimum Slope | 1/2:12 |
| Panel Attachment | Exposed Fastening System |
| Finishes | Smooth (standard); Embossed (optional) |
| Coatings | see colors here. |
PBR Panels are a 36″ functional wall system that provides durability and cost efficiency.Traditional looks are achieved by its clean profile that refracts light off its 1 1/4″ high ribs. The attachment of the panel is made from the exterior with color matched fasteners. Available in standard 26-gauge and comes in a multitude of colors. The girt-bearing leg design makes panel alignment and fastener engagement consistent. PBR wall fasteners are coated with a material that tests seven times more resistant to rust than the typical cadmium-zinc coated fasteners.
Air Infiltration: Tested per ASTM E283 with no leakage.
Water Penetration: Tested per ASTM E331 with no water penetration.
Insulated Metal Wall Panels
Basic Mesa Panel
Enhanced Fluted Panel
Standard Embossed Panel
Striated Panel
Textured Panel
Exposed Fastener Utility Panel
Architectural Metal Wall Panels
Concealed Fastener Architectural Panel
| Application | Wall, Fascia |
| Coverage Widths | 12″ |
| Gauges | 24 (standard); 22, 20 (optional) |
| Panel Attachment | Concealed Fastening System |
| Finishes | Smooth (standard); Embossed (optional) |
| Coatings | see colors here. |
Allied CF panels are a concealed fastener wall system that provides performance and compatibility. Clean, contemporary looks are achieved by the 1 1/2″ deep sculptured profile, embossed texture, and interior attachment. Available in 24 or 22-gauge steel and formed into a 16″ wide 3″ deep section. Allied CFW panel comes in 27 colors and resists damage and abuse. Other Panels are available upon request. Contact a Building Services Group representative at 888.864.8666 for further information.
Air Infiltration: Tested per ASTM E283 with no leakage.
Water Penetration: Tested per ASTM E331 with no water penetration.
Architectural Direct Fastened Panel
| Application | Wall |
| Coverage Widths | 36″ |
| Rib Spacing | 12″ on Center |
| Rib Height | 1 & 1/8″ |
| Gauges | 26 (standard); 22, 24, 29 (optional) |
| Panel Attachment | Exposed Fastening System |
| Finishes | Smooth (standard); Embossed (optional) |
| Coatings | see colors here. |
